Sorma 7 Step I-Dia Dry Polishing Pad 5", 200 Grit

Sorma 7 Step I-Dia Dry Polishing Pad 5", 200 Grit Regent ID: 044EP0953
ID: 445769
Sorma 7 Step I-Dia Dry Polishing Pad 5", 200 Grit Regent ID: 044EP0953
ID: 445769
In stock
SKU
445769-EA
$20.67

Sorma I-Dia Dry Polishing Pads

The first products of I-dia range, dedicated to the world of stone. I-Dia Mx is a "flexible" disc used to sand wet or dry stone materials and engineered stones, replacing the traditional abrasive discs. Available in both a 4" diameter and 5" diameter.

Benefits:

  • significantly higher duration
  • very competitive price
  • better finish for same grit size
  • no surface burning during finishing stage
  • very nice polishing on flat surfaces
  • excellent polishing result on all materials
  • reduction of storage of abrasives
  • Grits: 60 - 3000

Tech Tip

Remember, it is born against the standard abrasive disc of silicon carbide, which is used normally on marble only, but it has a high performance as granite plishing pad and on engineered stone, too.

Couple of recommendations:

  • Use on marble at around 4000/4500 rpm on marble and granite.
  • On engineered stone, work at 1800/2000 rpm, possibly use a little sprayed water, or a wet sponge, only a little, on grit #800 and #1500,
  • IMPORTANT DO NOT USE #3000 on engineered stone
Specifications
Regent ID 044EP0953
Brand SORMA
Write Your Own Review
You're reviewing:Sorma 7 Step I-Dia Dry Polishing Pad 5", 200 Grit
Shop all products