Blick Location Devices

Blick Location Devices

Blick Industries Location Devices: Solutions for your Holding Problems

Stops are used to locate work pieces on the table of a machine. The various styles shown below all serve the same purpose of providing a rigid reference point during setup which can then be removed or lowered to provide clearance for cutting tools while the machine is in operation.

Types of Location Devices:

  • The Pin-stop consists of a vacuum base and a removable delrin pin. The delrin pin is placed over the stainless steel pin on the base during setup, and then removed during the machining cycle. The pin-stop provides a simple, cost effective solution.
  • The Edge-stop uses the same removable pin as the pin-stop. Two pins protruding from the base of the unit reference against one of the edges of your machine

Blick Industries Location Devices: Solutions for your Holding Problems

Stops are used to locate work pieces on the table of a machine. The various styles shown below all serve the same purpose of providing a rigid reference point during setup which can then be removed or lowered to provide clearance for cutting tools while the machine is in operation.

Types of Location Devices:

  • The Pin-stop consists of a vacuum base and a removable delrin pin. The delrin pin is placed over the stainless steel pin on the base during setup, and then removed during the machining cycle. The pin-stop provides a simple, cost effective solution.
  • The Edge-stop uses the same removable pin as the pin-stop. Two pins protruding from the base of the unit reference against one of the edges of your machine

Shop all products in Blick Location Devices

12 Items

per page
Set Descending Direction

12 Items

per page
Set Descending Direction
Shop all products