FARNESE LYNX PLUS BRIDGE SAW 20HP WITH PNEUMATIC TILT

FARNESE LYNX PLUS BRIDGE SAW 20HP WITH PNEUMATIC TILT ID: 931150
FARNESE LYNX PLUS BRIDGE SAW 20HP WITH PNEUMATIC TILT ID: 931150
In stock
SKU
931150-EA
$50,000.00
Specifications
Brand FARNESE
Unit of Measure EACH
Write Your Own Review
You're reviewing:FARNESE LYNX PLUS BRIDGE SAW 20HP WITH PNEUMATIC TILT

Farnese LYNX Plus Bridge Saw 20HP with Pneumatic Tilt

The LYNX is a saw designed and built for the person who needs an accurate and versatile saw at an affordable price. This machine is composed of one main beam (bridge), which travels on two rails. The main beam consists of one fabricated H beam on which 8 guides are machined to carry and drive the cutting head. The movement of the main head (cross travel) is motorized and equipped with an electronic speed controller which enables the machine to cut at various speeds depending on material hardness. The up and down movement is motorized for quick and easy adjustment and positioning of the blade's level. Both Up-Down and Cross travel have limit switches at the end of travel which enable simple stroke length setting. The movement of the main beam over the rails is motorized for ease of bridge movement and it is programmable. A pendant station is situated on the inside of the working area so that the operator can use the machine while checking the material. The automatic cutting system has different settings which give the operator great flexibility in their work. After the initial menu the machine has a MANUAL and AUTO menu. In the MANUAL menu the operator can visualize the position of the machine at any time. He can also enter a single measurement, press IN or OUT and the machine will move and stop at the desired position. At that point he can press the START button and the blade will start up, move down, make a cut at the programmed speed and then move up and go back to its left most limit. In the AUTO menu the operator can program in 9 different cuts and each one can be repeated 99 times. Once you press the START button the machine will execute the cuts at the desired speed. The system always adds the thickness of the blade at each programmed movement.

  • 20 HP Direct Drive Motor 
  • Wireless Remote Pendant
  • Pneumatic Table Lock
  • 45° tilting head with plunge cut capabilities
  • Hydraulic tilting table for easy loading
  • A laser is mounted to the saw head rather than the bridge; Projects accurate cut line in both 90° & 45° positions
  • AC servo motors for smooth precision movements
  • Central lubrication for easy maintenance
  • Faster cutting modes available in manual mode and semiautomatic mod


Features & Feed Specifications

X STROKE (CROSS TRAVEL STROKE) 3,700 mm/145.7 in
Y STROKE (LONG TRAVEL STROKE) 3,700 mm/145.7 in
Z STROKE (HEAD UP AND DOWN) 280mm/11in
WIRELESS REMOTE YES
BLADE DIAMETER (MAX) 550 mm/22 in
BLADE SHAFT DIAMETER 60 mm/2.36 in
BLADE TILT 0-45º
MANUAL GREASING YES
MAIN SPINDLE POWER 11 KW/20 HP
MAIN SPINDLE SPEED 1,440 RPM/1,720 RPM
POWER REQUIREMENT 50AMP, 208 V, 3-PHASE


Dimensions of Installed Machine

WIDTH 5,400mm/212.6in
DEPTH 4,700mm/185in
HEIGHT 920mm/36.2in


Table Dimensions

WIDTH 3,400mm/133.9in
DEPTH 2,000mm/78.7in
HEIGHT 920mm/36.2in
ROTATION YES
TILT YES

Shop all products