Groves Heavy Duty Bundle Rack Long

• Rails designed with slots to hold 2 x 4’s which protect the slab edges and the finish on the rails (2 x 4s not included)
• Complete with 11" connector tube for butting rails together in a straight line for desired length
• Rails built with 2.5" square holes spaced 5" apart. A steal plate with identical holes is welded and boxed inside the rail, 1" up from the bottom
• 2.5" square tube posts and 2.5" square rubber post caps to separate bundles and slab
• Must have a 12” overhang on each side
• Heavy-duty powder coated finish

NOTE: When assembled the overall height of the posts are 5.5” less then listed (EXAMPLE: 72” post will be 66.5” above the top of the rail)

Store bundles or slabs in your shop or warehouse with ease in this well designed, patented rack! – Patent # 7143901

Maximum weight allowed per opening is 6,000 lbs. (3,000 lb. per post)

Minimum of 2-degree angle when dropping stone in between posts

Inspect posts each time used

NOTE: When assembled the overall height of the posts are 5.5” less then listed (EXAMPLE: 60” post will be 54.5” above the top of the rail) 

SUGGESTED PACKAGES FOR BUNDLES OR SLABS USING 60” POST