K&E DBX Safety Paint and Sealer Remover
Paint Stripping Solution
DBX Safety Paint Stripper and Sealer Remover : Removes any resin based coating
Good for stripping:
Paint, Urethanes, Epoxies, Floor Finishes & Sealers
DBX is a non-hazardous, water-soluble paint stripping solution, which effectively softens coatings by expanding the molecules so that coating can be removed easily. DBX has NO Methylene Chloride and it will not burn the person applying it. DBX works on conventional water-based and solvent-based paints, varnishes and sealers, as well as urethane and epoxy formulations.
Despite the fact DBX contains no highly toxic solvents or caustics, it retains benefits associated with each. DBX is a molecule expanding formula, so it works on virtually all types of coatings and sealers. DBX is also long lasting, so, like caustics, it is able to remove multiple layers of built up coatings without rapidly evaporating and losing its strength. Interior & Exterior Use.
Coverage:
75 - 100 sq. ft. depending on the porosity of the surface
Safety:
- Wear oil resistant rubber gloves and shoes
- Eye protection
- Ventilate enclosed areas
- If spraying or misting DBX, wear NIOSH approved respiratory equipment
- Protect surrounded plant life
Regent ID | DBXPaintSealRemover |
---|